Abit AB9 QuadGT : thảo luận !

Abit có main cho dòng P35 chưa nghỉ, P35 đang đổ bộ mà...:lamlo:


con Abit này có cái hay là cho chỉnh ram 1T, điều này mấy main xài Intel chipset ko thể có được...:somot:

 

có demo rùi nhưng chưa có ở VN. CHờ vài bữa coi sao ! :detien:

 

khả năng OC của P35 theo đánh giá là khá lắm cha, nếu so với 965P.

 

chip set mới mà khả năng OC ko bằng chipset cũ thì bán ai mua cha nội :beerdi: :coimo:
nói OC khá thì chỉ có OC ram trên nền chipset mới thì thấy có khác so với 965 thôi :D
965 & p35 mà OC trên CPU thì trên nhau ko nhiều :godau: :D
được cái p35 support nhiều cái mới hơn :D

 

như cái nào cưng !

 

mà giá DDR3 còn cao hơn cái main mới mệt chứ :lacdau:

 

oc ram thì nó khác sao cha??? nhiều cái mới hơn là cái gì...???

con P5K mới ra mà giá bằng con Commando thì tội gì mua Commando chứ....:detien:

 

Theo như anantech thì con này rất tốt. Xem chi tiết tại đây
http://www.anandtech.com/mb/showdoc.aspx?i=2934&p=1
FSB Overclocking Results

abit AB9 QuadGT
Overclocking Testbed Processor: Intel Core 2 Duo E6300
Dual Core, 1.86GHz, 2MB Unified Cache
1066FSB, 7x Multiplier
CPU Voltage: 1.4850V (default 1.3250V)
Cooling: Tuniq Tower 120
Power Supply: OCZ GameXStream 700W
Memory: GeIL PC2-6400 800MHz Plus (2x1GB - GX22GB6400PDC)
(Micron Memory Chips)
Video Cards: 1 x MSI X1950XTX
Hard Drive: Seagate 320GB 7200RPM SATA2 16MB Buffer
Optical Drive: Sony 18X AW-Q170A-B2
Case: Cooler Master CM Stacker 830
Maximum CPU OC: 515x7 (4-4-4-12, 1:1, 2.400V), CPU 1.4850V -----> 3605MHz (+93%) .

We were able to reach a final benchmark stable setting of 7x515 FSB resulting in a clock speed of 3605MHz. The board was capable of running up to 7x525 FSB but would consistently fail our Dual Prime95 test, although it passed all our game and synthetic benchmarks. We settled on the 7x515 FSB setting and set our VCore to an acceptable 1.4850V with Vdroop being around .02V during load testing. We were able to operate our GEIL memory at 4-4-4-12 at 2.4V with these settings.

The BIOS allows you to manipulate the MCH strap and memory speeds resulting in a wide variety of performance options based on your components. The current BIOS allows you to stay in the 1067 strap up to the 525FSB ceiling with our E6300 and E6400 chips, and this allows for some incredible memory and system performance at the higher FSB settings. Our E6600 has hit 7x550FSB in initial testing at this time. Our board was extremely stable throughout testing although we noticed the requirement for slightly higher memory voltages at the upper FSB rates due to the tight sub-timings. During overclocking we generally found that at 7x400 and above with our E6300 and the memory set at a 1:1 ratio (800 DDR2) that 4-4-4 timings were up to 7% faster in our benchmarks than forcing the memory latencies to 3-3-3 as the sub-timings were set tighter resulting in improved throughput....