Cái ổ cứng nhà em check ko thấy lỗi nhưng ko hiểu sao dạo này nó điên điên, cài CSS corrup file hoài. Mặc dù cái file cài đó trước kia em cài mấy lần rồi có sao đâu. Cả cái dĩa chép file cài giờ bỏ vô cũng bị corup luôn. Đúng là họa vô đơn chí, từ đầu năm đến giờ em toi 2 cái ổ cứng rồi. Đây là cái phân tích của speedfan Your hard disk is a ST380011A with firmware 8.01. The average temperature for this hard disk is 36C (MIN=25C MAX=47C) and yours is 42C. Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full report about the reliability, health and status of your hard disk is generated: Your hard disk is not below any attribute threshold. This is good. Your hard disk was never below any attribute threshold. This is good. Your hard disk is now being compared to real data used to define normal values for your specific hard disk model. This way, the analysis can automatically use proper operating ranges. The images give you an idea of how each attribute is within such range. Current and raw values are shown for easier reference for experienced users. There are 1166 hard disk models in the current archive. Attribute Current Raw Overall Raw Read Error Rate 64 209394435 Good Spin Up Time 98 0 Good Start/Stop Count 100 156 Very good Reallocated Sector Count 100 0 Very good Seek Error Rate 81 147721374 Very good Power On Hours Count 97 2842 Very good Spin Retry Count 100 0 Very good Power Cycle Count 100 825 Very good Hardware ECC Recovered 64 209394435 Good Current Pending Sector 100 0 Very good Offline Uncorrectable Sector Count 100 0 Very good Ultra DMA CRC Error Rate 200 39 Very good Write Error Rate 100 0 Very good TA Increase Count 100 0 Very good All of the attributes of your hard disk have normal values. This is good. The overall fitness for this drive is 97%. The overall performance for this drive is 97%. Bác nào biết cách giải quyết giúp em với. Cám ơn nhiều
