Drive level testing - main function is testing and repair (regenerates) bad sectors for detected devices - you get many information about detected devices File level testing - read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32 - check/remove (regenerates) bad sectors records, flags in FAT table Features: * fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay * device access with interrupt 13h, direct via ATA ports, with ASPI drivers * detects ATA/ATAPI/SATA/SATA with NCQ devices with on-board and add-on controller cards * detects USB devices via USB ASPI driver only * detects SCSI hard drives via INT13h or ASPI drivers * other SCSI devices are detected via ASPI drivers only (must be loaded before) * with ASPI drivers you got more informations about SCSI devices * test and repair device for bad sectors * many different test-functions for hard drives * resize hard drives which supports SET MAX ADDRESS/EXT (supports 28/48-bits LBA addressing modes) * drive lock detection via security feature (Security Menu) * S.M.A.R.T. functions for ATA/SATA and SCSI/USB drives only * informations about devices (ATA/ATAPI, INT13h, ASPI) * sector viewer for devices (also for ZIP, CD-data discs) * to access ATA/SATA CD-ROM drive you don't need any driver or MSCDEX * enable/disable some features for direct-access devices * Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of hard drive) Hidden Content: You must either reply or click 'Like' to see the hidden information contained here.
